Coal Flakes 5lbs
DECORATIVE FLAKES: EPOXY TO/GO OFFERS A BROAD RANGE OF DECORATIVE FLAKES. THE AMOUNT OF DECORATIVE FLAKES IS BASED ON DESIRED COVERAGE LEVEL/100 SQ. FT.
Coverage level approximate percentage/ Approximate quantity
Very light 2% 0.3 lb. 0.125 kg
Light 5% 0.7 lb. 0.3 kg
Medium 12.5% 1.75 lb. 0.8 kg
Intense 25% 3.5 lb. 1.6 kg
Very intense 50% 7 lb. 3.2 kg
Complete 100% 15 lb. 7 kg
*Remember: you need to apply a minimum of 1 coat of clear epoxy over the flakes to prevent the flakes from chipping. You can apply up to 3 coats of clear epoxy, depending on the thickness and durability you want.
**Apply a second coat between 24 and 48 hours later to get a very glossy and uniform finish. If the second coat must be applied more than 48 hours later, sand the surface using a sander fitted with 60-grit sandpaper in order to remove the gloss and avoid any adherence problems.
***Times are approximate and will be affected by changing ambient conditions, especially
changes in temperature and relative humidity.*
****Make sure to always refer to the complete user manual.